One of the best features on a new RC drone is the altitude hold feature, which can be controlled with your controller, or with your handheld remote. There are several different types of hold, and the altitude hold allows you to use it to ensure that you stay within set guidelines or to even get into hover mode, which will allow you to fly lower than normal.
The first type of altitude hold that you will see is a stabilized hold. If you want to be in hover mode, you should hold your RC helicopter up at an altitude where it would normally hover. When you are done with your hover move to a lower altitude and do the same thing.
In order to create a stabilized hold, all you have to do is adjust the position of your controller as you are flying and then stabilize your RC helicopter. Since this will add a little bit of play to your flight, you should try to fly slower and allow for smooth movements. Before long, you will start to feel comfortable with your handheld remote control and how to control the altitude hold feature of your Benyi RC Drone. This will help keep you safe and save you time.
Automatic hold is the next type of altitude hold that you will see. To perform this hold technique, you simply need to hold your RC drone at an altitude that would normally hover and then add a few degrees to your controller's axis. For example, if you were trying to hover at 400 feet, you would raise your controller's up to 900 feet. After doing this move, you would lower your controller's up again to 200 feet.
Manual altitude hold is a slightly more complicated technique. In order to create a manual hold, you need to hold your Benyi RC Drone at a lower altitude than you normally would in order to keep the system in the autopilot mode. Then when your hands go back to normal position, you can release the throttle and allow the drone to come back down to the desired altitude. If you did not do the proper procedure and hold at the right altitude, you could cause damage to your drone or have the robot become unstable.
If you want to perform a manual or automatic altitude hold, you should know that these two techniques are completely different. If you try to take your RC drone into manual altitude hold, you will need to open the throttle and allow the throttle to control the distance between the drone and the ground. If you fail to do this properly, you will destroy your drone! The easy way to prevent this problem is to make sure that you do not exceed a specific distance before allowing the throttle to return to its original position.
If you are attempting to create an altitude hold, you should make sure that your drone is in a place that is more stable and allows for easier manoeuvring. The best place to start is a level spot with a large amount of room and a low slope. This will ensure that your drone has a steady reference point and is flying at the right height. Once you feel that you have the drone in a place that will make it easy to hover, you can proceed to climb.
While climbing, you should slowly monitor the GPS and try to see what the terrain looks like. The terrain can vary from sand dunes, valleys, mountains and anything else that might exist. The main idea here is to keep the drone where it is in your initial position. Once you have a decent amount of height, you should begin to slowly pull back on the throttle and see if the drone can stay in hover mode. If it can, you can then begin to roll your drone to a higher elevation.
If your drone cannot hover or moves slowly while in hover mode, you should reverse the direction of your throttle and try again. This technique can get frustrating, so keep trying until you find a solution.
Once you have found a level place, you can now release the throttle and gently send the drone into hover mode. You will notice that the drone is still drifting down while in hover mode, but you have a stable area that you can land on.
Once you find a flat place and a point where you can hover and your RC drone can follow you instructions, you directions, try applying the directions of the last mode mentioned above and try to have your drone hover in a similar spot while you are applying the altitude hold. directions.
FPV REAL-TIME TRANSMITTION: With the built-in WiFi module, you can see exactly what your camera sees with a live video on your mobile device by installing the APP. HEADLESS MODE - No More Confuse About the Direction : As a Beginner or Kid, you may concern about direction identify (especially non-sensitive about the direction ones), then you can activate headless mode in the beginning of flight, thus no need to distinguish the drone's direction, and you can fly the drone easily. AUTOMATIC ALTITUDE HOLD: Powerful air pressure altitude hold function allows you to release the throttle stick and the drone will keep hovering at the current height. Easy for you to shoot quality images or videos EASY SAFE AND FUN TO PLAY FOR BEGINNERS: Built-in the latest 6-axis flight control systems offer strong stability, easily implement various flight movements, stronger wind resistance; Headless mode eliminates need to adjust aircraft position before flight & improves learning curve. LONG FLIGHT TIME: Includes 3 strong powerful 3.7V 600 mAh LiPo batteries to extend the fun! FAA Registration NOT Required.